skip to Main Content

Slide ZKLT-120-2LB Multifunctional
Chamber Cleaning System

For the cleaning and drying of load carriers of various sizes and parts stored in washing baskets

Zippel’s multifunctional chamber system is designed for cleaning and drying load carriers of different sizes and parts stored in washing baskets. Using the spray cleaning process, it achieves an optimum cleaning performance.

The KLT (= small load carrier) chamber cleaning machine impresses with its versatility, as it can clean a wide range of components. The system consists of a cleaning chamber equipped with a rotation unit and an automatic lifting door. The size of the workpiece carriers is 1,300 x 1,300 x 1,300 mm and the maximum load is 1,000 kg. The system is fed manually via a traversing carriage or by integrating it into an automated system.

One advantage of this system is the rotation axis, which allows the washing parts to be rotated through 360°. Thanks to this rotation option and the arrangement of the spraying strands, the parts to be cleaned can be washed off and out optimally. Even the smallest gaps and hard-to-reach spots such as drill holes are easily reached.

To achieve a perfect cleaning result, programmable sequences for washing and rinsing can be set. A carryover is reduced to a minimum by blowing out the cleaning strings with compressed air between the washing cycles.

Following the cleaning process, the parts to be cleaned are dried with a medium pressure fan and downstream air heaters. A low-pressure fan extracts the resulting vapors. A built-in dosing pump enables the precise dosing of cleaning agents. As the machine is made of stainless steel, various cleaning agents can be used.

Oil filtered out of the washing process is subsequently removed from both tanks and separated in the oil separator. The water, which is now clean again, can be returned to the tanks. In this way, we reduce the degree of contamination of the cleaning bath and ensure an extended service life of the Zippel machines by using an environmentally friendly closed recirculation
system.

A leakage warning probe protects the chamber and the floor pan from overflowing.

Zippel Tauchanlagen Und Zippel Reinigungsanlagen

Technical specifications

Options are available on request.

General Data

Width

2,806 mm

Depth

2,806 mm

Height

3,480 mm

including lifting gate 3,903 mm

Cleaning Tank

Volume

600 l

Pump

5.0 bar

30 m³/h

7.5 kW

Filter

100 μm

Heating

2 x 9 kW

Dosing pump

4 bar

15 l/h

0.019 kW

Oil backwashing pump

1 bar

1.8 m³/h

0.37 kW

Rinsing Tank

Volume

600 l

Pump

5.0 bar

30 m³/h

7.5 kW

Filter

100 μm

Heating

2 x 9 kW

Drying

Blower

2,500 Pa

1,560 m³/h

0.75 kW

Air heater

18 kW

Vapor suction

850 Pa

1,350 m³/h

0.55 kW

Drives

Lifting gate

0.75 kW

Gyro-wheel

0.55 kW

Waste water pump

1.5 bar

24 m³/h

1.1 kW

Connections

Electrical

400 V

50 Hz

72.719 kW total

Fresh water

1“

3-5 bar

Waste water

1 1/2″

Compressed air

3/4″

6 bar

Subject to technical changes.

Back To Top